亚洲精品免费视频观看视频_亚洲制服丝袜中文字幕专区_九九九久久久黄片_国产无码免费在线视频

usage method:

1. Place the machine on a horizontal work surface, ensuring that the four legs under the machine are stable, reliable, and not shaking Carefully inspect the rotary drum for any debris, and clean up any foreign objects to prevent damage to the machine Inspect the dripping oil of each component Are the fasteners loose during use, and are the switch circuits damaged

To ensure safety, it is necessary to reliably ground at the connection point, and a leakage protector must be installed at the power connector!!!

3. When the machine is working, it is strictly prohibited to put hands into the machine, and wet hands should not be used to press the switch during the processing.

Before cleaning and disassembling, first disconnect the power supply to stop the machine from running.

5. Replace the calcium based grease of the bearing every 3 months.

6. If any abnormal situation occurs during use, the power switch should be quickly turned off, and after the fault is eliminated, it should be restarted to make it work normally.

Usage operation:

1. Before starting work, try cutting and observe whether the specifications of the vegetables being cut are consistent with the required specifications. Otherwise, adjust the slice thickness or cutting length to meet the requirements before proceeding with normal work.

2. To install the vertical knife, first rotate the adjustable eccentric wheel until the knife holder reaches the bottom dead center, then lift the knife holder up by 1/2 millimeter to make contact with the conveyor belt, and tighten the nut to secure the vertical knife to the knife holder. Explanation: The lifting height of the knife holder can be controlled according to the vegetables being cut. If the height of the elevated structure is too low, vegetables may be cut together. If the height of the elevated structure is too high, it may damage the conveyor belt.

3. Vegetable cutting length adjustment: Rotate the adjustable eccentric wheel, loosen the connecting rod fastening screw, and the cutting thread can move the fulcrum from outside to inside; When cutting thick threads, the pivot point can be moved from the inside out, and the adjustment screw can be tightened after adjustment.

4. Slice thickness adjustment is based on the structure of the slicing mechanism, and an appropriate adjustment method is selected.

1. This product is a multifunctional vegetable cutter, which comes with four knives including slicing blades, curved blades, square blades, and diamond blades, and two slicing blades without slicing blades.

2. This machine is suitable for processing hard and soft root, stem, leaf vegetables and kelp, and can be cut into various patterns such as slices, blocks, silk, dices, diamonds, and curves.

Centrifugal slice thickness adjustable from 2-10 millimeters

Conveyor belt slicing and cutting thickness adjustable from 1-25mm

Diamond blade cutting thickness: 16mm

Cutting blade cutting width: 19mm

Note: All quotations do not include shipping costs. For further inquiries, please contact customer service. Our machine manufacturer sells directly, eliminating intermediaries, simplifying the circulation process, ensuring quality, and offering low prices. Thoughtful service, please feel free to make your purchase.