亚洲精品免费视频观看视频_亚洲制服丝袜中文字幕专区_九九九久久久黄片_国产无码免费在线视频

The cutting surface of the Shunran vegetable slicer is smooth and scratch free, without a blade. The thickness and thickness can be freely adjusted, and the cut pieces, strips, and silk are smooth and even without breakage. Made of stainless steel, with an external water inlet lubrication port, no vulnerable parts, centrifugal working principle, low equipment vibration, and long service life

Installation and debugging
Place the machine on a level workspace to ensure a stable and reliable placement. 2. Before use, check all parts to ensure that fasteners are not loose during transportation, switches and power cords are not damaged during transportation, and take corresponding measures in a timely manner. 3. Check for foreign objects inside the rotating drum or conveyor belt. If there are any foreign objects, they must be cleaned thoroughly to avoid tool damage. 4. Confirm that the power supply voltage is consistent with the rated voltage of the machine. Grounding in another location, the marked area should be reliably grounded. Extend the power cord and find an electrician to connect the machine power cord to a fully disconnected long-distance power supply. Connect the power supply and press the“ ON” Button, check the steering, if the steering of the V-belt wheel is consistent with the indication, it is correct. Otherwise, cut off the power and adjust the wiring.
matters needing attention
Do not put your hands near the cutter or under the safety net during the operation of machine A to avoid danger.
Do not place your hands on the conveyor belt or vegetable press belt during the operation of machine B to avoid danger.
Do not turn on the switch during machine maintenance to avoid danger.
Do not perform formal maintenance or upkeep during the operation of machine D. To avoid causing personal injury or death.
Maintenance and repair
All maintenance work must be carried out with the power cut off.
After each use, clean the machine carefully. During cleaning, do not use sharp tools to touch the conveyor belt and vegetable press belt, and do not spray with a water spray pipe.
If the conveyor belt and vegetable pressing belt are found to be loose and slippery, the tension bolt or spring pressure should be adjusted to the appropriate position in a timely manner. The tension or pressure at both ends of the belt should be basically equal, otherwise the conveyor belt or vegetable pressing belt will deviate.
3. Check the Song Jin and wear condition of the V-belt, and adjust and replace it in a timely manner. When the V-belt loosens, loosening the tension mechanism bolt for adjustment is done by tightening the bolt after the V-belt is tightened Inject oil into the ratchet, gears, and sprockets once per shift, using 20 # engine oil, with a recommended amount of ten drops per injection. Add and replace the lubricating grease in the bearings according to usage, using calcium based grease.

When the machine is working, if the sound is abnormal, it must be stopped immediately for inspection. After the fault is eliminated, it can continue to work.